For the puzzle that is still sitting out

Still Stuck on the Puzzle You Quit Last Week?

When glare washes across glossy pieces, colors flatten, edges disappear, and the hard section sits there unfinished.

That shiny patch is hiding the detail you need for the next match.

See Why It Happens
An unfinished dark-blue puzzle under a ceiling light with a bright glare patch hiding the pieces
The room looks bright. The next piece is still hiding under the shine.

The Room Looks Bright Enough. The Pieces Don’t.

You sat down after dinner to finish one more part.

The border was done.
The box lid was open.
You knew the next piece was somewhere in the pile.

Then the glossy section caught a pale shine.
The dark blues started looking the same.
The edge you just saw disappeared when you looked back down.

You tilted a piece.
Checked the picture.
Moved the same few pieces around again.

Nothing placed.

So the puzzle stayed out another week.

You still wanted to finish it.
The hard section just kept hiding the next match.

At first, it can feel like the section is just too hard.

Or the dark pieces are all the same.

Or the room still needs more light.

Then the same shiny patch shows up again right where you are trying to work.

The Shine Is Hiding the Details You Need

Glare covers the small clues your eyes use to finish.

That is why a puzzle can feel impossible while the room still looks bright.

The board stops giving you enough clear detail to keep matching pieces.

So you start working around the shine instead of through the section.

The printed details are still there. The glare is sitting on top of them.

  • the cut line between two similar pieces
  • the small color shift in a dark section
  • the printed edge that tells you where a piece belongs
  • the difference between a printed shadow and a shine on the board
A close view of a glossy unfinished puzzle section with a bright glare patch hiding piece detail
The hard section can look bright and still hide the details you need.

Glossy Pieces Bounce Light Back Into Your Eyes

Glossy puzzle pieces do not only take in light.
They throw some of it back.

When that reflection lands across the board, the pieces underneath lose contrast.

You start guessing instead of matching.

Then puzzle night gets slower.
You place fewer pieces.
You push the board away earlier than you wanted to.

More Light From Above Still Leaves the Shine

Most puzzlers try the obvious things first.

They turn the room brighter.
They pull a floor lamp closer.
They move the chair and try the same section from a new angle.

The room can look fine while the puzzle still looks washed out.
The shiny patch stays right where the next piece should be.

Extra light in the room does not always clear the board.

The pieces need light that helps you see them from the table.

The same dark puzzle under overhead light with a glare patch, compared with clear table-level light from EMBAR
Overhead glare hides the dark detail. Table-level light keeps the pieces clear.

Light Beside the Puzzle Makes the Section Workable Again

Put the light beside the pieces.

When useful light comes from the table beside the puzzle, the surface shows more of what is already printed on the pieces.

Edges look clearer.
Colors separate sooner.
The hard section starts moving again.
The next piece gets easier to find.

Same unfinished puzzle.
Same hard section.
More usable piece detail.

See EMBAR at the Puzzle Table

The table-level fix for the unfinished section

EMBAR Puts Light Beside the Puzzle

EMBAR is a cordless puzzle light made to sit beside your puzzle and light the active section from the table.

It helps clear the glare patch, bring back color contrast, and make edges easier to spot.

So the 1,000-piece puzzle you quit last week can finally move again.

Picture the section that stopped you.
Put light beside that section.
Look for the edge that was hard to see before.
Find the next piece a little sooner.
Place one.
Then another.

See every puzzle piece clearly.
Finish the section that stopped you.

A gold EMBAR puzzle light beside a colorful unfinished puzzle with every piece clear and visible
Table-level light beside the active section, so glossy pieces stay easier to compare.

What Changed Once the Light Moved to the Table

Puzzlers use EMBAR when the hard section stops moving and the pieces stop looking clear.

More than 14,000 puzzlers light their tables with it — rated 4.8 stars.

Dark pieces separate faster Glossy sections stop washing out as badly Edges become easier to compare The active section feels workable again Puzzle night lasts longer

“no reflection on my puzzles”

— Carolyn B.

“see every piece of our puzzle, which is a blessing”

— Linda G.L.

“puts the light right where I want it”

— Monalisa M.

Rated 4.8 · loved by 14,000+ puzzlers

Finish Your Puzzle
 Rated 4.8 · loved by 14,000+ puzzlers

EMBAR Cordless Puzzle Light

The lamp that puts useful light beside the section that stopped you.

Place EMBAR beside the section that stopped you.

Its table-level light helps glossy pieces show clearer edges, stronger color contrast, and the small details glare was hiding.

Clearer piece edgesSpot cut lines and printed detail without fighting the shine.
Dark colors separateBlue, green, black, and shadow pieces become easier to tell apart.
Move it as the puzzle growsCordless light follows the active section around the board.
Cordless + rechargeableWarm / cool / blended lightDimmable brightnessWeighted metal base15+ hours per charge
Try it on the section that made you quit. 30-day money-back guarantee.
  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • Shop Pay
  • Visa

Free US Shipping · 30-Day Money-Back Guarantee

Try it on the section that made you quit

Place EMBAR beside your puzzle table tonight.

Put it next to the section that made you quit.
Choose warm, cool, or blended light.
Move it as you work.

Then look for what changes first:

  • Can you tell the dark pieces apart sooner?
  • Does the shiny patch ease up?
  • Do the edges look clearer?
  • Does the next piece feel easier to find?

What you get

Light beside the pieces
Useful light where the puzzle is happening

Cordless and rechargeable
Move it around the table without dragging a cord

Three light temperatures
Warm, cool, or blended

Dimmable
Soft or bright without lighting the whole house

Weighted metal base
Stays steady beside loose pieces

Compact footprint
Sits on the table without taking over the board

15+ hours per charge
Long enough for several evening sessions

30-day money-back guarantee
Try it on your real puzzle table

Finish Your Puzzle

If it does not help your setup, send it back within 30 days.

Frequently asked questions

Will this help with glossy puzzle pieces?

Yes. That is the exact situation EMBAR is built for. It sits beside the puzzle so useful light comes from the table, instead of relying only on light from above.

Why don’t I just use a brighter ceiling bulb?

More overhead light can make the reflection brighter. The issue is not only brightness. It is where the light sits relative to the puzzle. EMBAR brings the light down beside the pieces.

Can I move EMBAR around a large puzzle?

Yes. EMBAR is cordless, so you can place it beside the section you are working on now — border, sky, trees, dark pieces, or wherever the next match is hiding.

Will it take up much table space?

No. The base is compact and weighted, so it sits beside your pieces without taking over the board.

How long does the battery last on one charge?

EMBAR runs 15+ hours per charge, depending on the brightness setting.

What if it doesn’t help my setup?

You have 30 days to try it on your own puzzle table. If it does not help, send it back.

Ready to Finish the Puzzle You Left on the Table?

Put EMBAR beside the unfinished section and see what becomes easier to spot. Try it on your real puzzle table for 30 days.

Finish Your Puzzle